This guide is related to Imago Capture X application.
In this guide, you will find how to:
- Create a Capture X Profile on Imago Portal
- Set Up The Capture X Profile on The Software
Create a Capture X Profile on Imago Portal
In order to use Imago Capture X, you must have first created an account and a Workspace with the imagery type and image type in the Imago Portal.
You can also read the Data Hierarchy within Imago article for more information.
Next, you will have to define the actions to be performed to the imagery:
Setting Up the Capture X Profile on The Software
Where to Next?
This article introduced you to Setting Up the Capture X Profiles on Imago Portal and in the Software. Want to use your mobile to capture and upload images? Get started with Imago Mobile explains how to do this.
Do you have a single image you want to upload via the portal instead of your camera or mobile? Upload Single Pictures to Imago explains how to do this.
Here is a list of supported cameras.
Capturing the best quality core images is essential. Capture Better Drill Core Images: Crash Course on Manual Camera Settings explains how to do this.
An imagery station is important for the capture of high-quality images. What Imaging Station Shall I Build? provides some good advice depending on whether you are capturing core, reverse circulation cuttings or field piles. For chip trays, Build a Chip Tray Imaging Station explains how this may be done.
Have a look at using a Pre-built Core Imaging Station, if time is of the essence.
Want to link your captured images to your downstream product? Create a URL Link to an Imago Image explains how to do this.